China Hot selling Cm490 Cm690 Stud Anchor Chain/Stud Less Anchor Chain Grade U1 U2 U3 with Certificate 30 Years Chain Factory roller chain

Product Description

CM490 CM690 Grade U1 U2 U3 Stud/Studless Anchor Chain With Certificate 30 Years Chain Factory

 

 

 

STUD LINK ANCHOR CHAIN,LINK SIZE(6×3.6D),TEST LOAD AND WEIGHT
D(Φ)   DIAMETER CHAIN LINK SIZE AM1              U1 STUD LINK CHAIN AM2              U2 STUD LINK CHAIN AM3              U3 STUD LINK CHAIN APPROX.   WEIGHT
OUTSIDE   LENGTH OUTSIDE  WIDTH PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD 27.5M
INCH MM MM MM MM KN KN KN KN KN KG
1/2 12.5 75 45 46 66 66 92 92 132 98.00
9/16 14 84 50.4 58 82 82 116 116 165 119.00
5/8 16 96 57.6 76 107 107 150 150 216 156.00
11/16 17.5 105 63 89 127 127 179 179 256 186.00
3/4 19 114 68.4 105 150 150 211 211 301 230.00
13/16 20.5 123 73.8 123 175 175 244 244 349 260.00
7/8 22 132 79.2 140 200 200 280 280 401 300.00
15/16 24 144 86.4 167 237 237 332 332 476 370.00
1-1/16 26 156 93.6 194 278 278 389 389 556 431.00
1-1/8 28 168 100.8 225 321 321 449 449 642 496.00
1-3/16 30 180 108 257 368 368 514 514 735 564.00
1-1/4 32 192 115.2 291 417 417 583 583 833 635.00
1-5/16 34 204 122.4 328 468 468 655 655 937 712.00
1-7/16 36 216 129.6 366 523 523 732 732 1050 800.00
1-1/2 38 228 136.8 406 581 581 812 812 1160 887.00
1-9/16 40 240 144 448 640 640 896 896 1280 1032.00
1-5/8 42 252 151.2 492 703 703 981 981 1400 1084.00
1-3/4 44 264 158.4 538 769 769 1080 1080 1540 1197.00
1-13/16 46 276 165.6 585 837 837 1170 1170 1680 1310.00
1-7/8 48 288 172.8 635 908 908 1270 1270 1810 1438.00
2 50 300 180 686 981 981 1370 1370 1960 1546.00
2-1/16 52 312 187.2 739 1060 1060 1480 1480 2110 1661.00
2-1/8 54 324 194.4 794 1140 1140 1590 1590 2270 1791.00
2-3/16 56 336 201.6 851 1220 1220 1710 1710 2430 1926.00
2-5/16 58 348 208.8 909 1290 1290 1810 1810 2600 2086.00
2-3/8 60 360 216 969 1380 1380 1940 1940 2770 2249.00
2-7/16 62 372 223.2 1030 1470 1470 2060 2060 2940 2361.00
2-1/2 64 384 230.4 1100 1560 1560 2190 2190 3130 2516.00
2-9/16 66 396 237.6 1160 1660 1660 2310 2310 330 2676.00
2-11/16 68 408 244.8 1230 1750 1750 2450 2450 3500 2885.00
2-3/4 70 420 252 1290 1840 1840 2580 2580 3690 3571.00

MATERIAL:(U1:CM370;   U2:CM490;   U3:CM690)
STUD LINK ANCHOR CHAIN,LINK SIZE(6×3.6D),TEST LOAD AND WEIGHT
D(Φ)   DIAMETER CHAIN LINK SIZE AM1              U1 STUD LINK CHAIN AM2              U2 STUD LINK CHAIN AM3              U3 STUD LINK CHAIN APPROX.   WEIGHT
OUTSIDE   LENGTH OUTSIDE  WIDTH PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD 27.5M
INCH MM MM MM MM KN KN KN KN KN KG
1/2 12.5 75 45 28.75 57.81 41.20 82.60 56.40 112.80 85.40
9/16 14 84 50.4 34.78 69.93 51.00 101.90 70.76 141.51 106.55
5/8 16 96 57.6 47.10 94.72 66.20 132.30 92.42 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.10 178.35
3/4 19 114 68.4 66.42 133.57 93.60 187.20 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.70 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.40 250.90 174.40 349.40 264.49
15/16 24 144 86.4 105.98 213.25 149.90 298.90 207.90 415.80 341.82
1-1/16 26 156 93.6 124.38 250.12 175.40 350.80 244.00 488.00 369.94
1-1/8 28 168 100.8 144.26 290.08 203.80 406.70 283.00 566.00 427.04
1-3/16 30 180 108 165.60 333.00 234.20 467.50 324.90 649.80 490.98
1-1/4 32 192 115.2 188.42 378.88 265.60 531.20 369.60 739.30 559.65
1-5/16 34 204 122.4 212.70 427.72 299.90 599.80 417.30 834.60 671.52
1-7/16 36 216 129.6 238.46 479.52 336.10 672.30 467.80 935.70 707.85
1-1/2 38 228 136.8 265.70 534.28 374.40 748.70 521.30 1042.50 788.98
1-9/16 40 240 144 294.40 592.00 414.50 829.10 577.60 1155.20 869.36
1-5/8 42 252 151.2 324.58 652.68 457.70 915.30 636.80 1273.60 959.30
1-3/4 44 264 158.4 356.22 716.32 502.70 999.60 698.90 1398.00 1111.25
1-13/16 46 276 165.6 389.34 782.92 548.80 1097.60 763.90 1527.80 1152.07
1-7/8 48 288 172.8 423.94 852.48 597.80 1195.60 831.70 1663.50 1256.26
2 50 300 180 460.00 926.09 648.80 1293.60 902.50 1805.00 1360.41
2-1/16 52 312 187.2 497.54 1000.48 697.63 1395.26 976.14 1952.28 1485.61
2-1/8 54 324 194.4 536.54 1078.92 752.33 1504.66 1052.68 2105.36 1648.08
2-3/16 56 336 201.6 577.02 1160.32 809.09 1618.18 1132.10 2264.20 1715.97
2-5/16 58 348 208.8 618.98 1244.68 867.91 1735.82 1214.40 2428.80 1844.50
2-3/8 60 360 216 662.40 1332.00 928.80 1857.60 1299.60 2599.20 1973.29
2-7/16 62 372 223.2 707.30 1422.28 991.75 1983.50 1387.68 2775.36 2101.56
2-1/2 64 384 230.4 753.66 1515.52 1056.77 2113.54 1478.66 2957.32 2298.47
2-9/16 66 396 237.6 801.50 1611.72 1123.85 2247.70 1572.52 3145.04 2398.10
2-11/16 68 408 244.8 850.82 1710.88 1192.99 2385.98 1669.26 3338.52 2522.88
2-3/4 70 420 252 901.60 1813.00 1264.20 2528.40 1768.90 3537.80 2697.65

Our Services
1. Prompt reply for inquiry within 24 hours
2. One on one service guarantees you the best purchasing experience.
3. Strong production capacity and professional technical engineer can guarantee the delivery time and quality.
4. Strict quality control.

 

ZheJiang CZPT chain is a professional manufuacturer which is specialized in producing lifting chain, mining chain,lashing chain,anchor chain, ash handler chain,fishing chain etc..since 1991.

We have certified by ISO 2000 ,and get CE certification, safety certificate of mining products,classification society certification.
Our chains can be exported to overseas markets,such as United States,Japan,Germany,Russia,,Eastern Europe and Southeast Asianountries.

Haiwei chains has 4 producing lines with more than 220 employees.
Our  chain’s diameters ranges from 6mm-42mm and grade standard ranges form G30 to CZPT serious which can meet the requirementsof mining, lifting,berthing,strapping,lifting, fishery and other fields.

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Alloy
Surface Treatment: Baking Paint
Feature: Heat Resistant
Chain Size: D3mm-D68mm, G30-G100
Structure: Welded Chain
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Hot selling Cm490 Cm690 Stud Anchor Chain/Stud Less Anchor Chain Grade U1 U2 U3 with Certificate 30 Years Chain Factory   roller chainChina Hot selling Cm490 Cm690 Stud Anchor Chain/Stud Less Anchor Chain Grade U1 U2 U3 with Certificate 30 Years Chain Factory   roller chain
editor by CX 2023-06-07

Engineering class chain

As one of the engineering class chains with sawtooth plates manufacturers, suppliers, and exporters of mechanical products, We offer engineering class chains and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of engineering class chain.

Recent Posts